Wednesday, 7 September 2016

Java programs

Palindrome number algorithm

Get the number to check for palindrome
Hold the number in temporary variable
Reverse the number
Compare the temporary number with reversed number
If both numbers are same, print "palindrome number"
Else print "not palindrome number"
class PalindromeExample{
public static void main(String args[]){
int r,sum=0,temp;
int n=454;//It is the number variable to be checked for palindrome
temp=n;
while(n>0){
r=n%10; //getting remainder
sum=(sum*10)+r;
n=n/10;
}
if(temp==sum)
System.out.println("palindrome number ");
else
System.out.println("not palindrome");
}
}
out put:
```
palindrome  number
```

Factorial Program using loop in java

class FactorialExample{
public static void main(String args[]){
int i,fact=1;
int number=5;//It is the number to calculate factorial
for(i=1;i<=number;i++){
fact=fact*i;
}
System.out.println("Factorial of "+number+" is: "+fact);
}
}
out put:Factorial of 5 is: 120

Prime Number Program in Java

Prime number in Java: Prime number is a number that is greater than 1 and divided

by 1 or itself. In other words, prime numbers can't be divided by other

numbers than itself or 1. For example 2, 3, 5, 7, 11, 13, 17.... are the prime numbers.

class PrimeExample{
public static void main(String args[]){
int i,m=0,flag=0;
int n=17;//it is the number to be checked
m=n/2;
for(i=2;i<=m;i++){
if(n%i==0){
System.out.println("Number is not prime");
flag=1;
break;
}
}
if(flag==0)
System.out.println("Number is prime");
}
}
Output:Number is prime

Armstrong Number in Java: Armstrong number is a number that is equal

to the sum of cubes of its digits for example 0, 1, 153, 370, 371, 407 etc.

Let's try to understand why 153 is an Armstrong number.

153 = (1*1*1)+(5*5*5)+(3*3*3)
where:
(1*1*1)=1
(5*5*5)=125
(3*3*3)=27
So:
1+125+27=153

class ArmstrongExample{
public static void main(String[] args) {
int c=0,a,temp;
int n=153;//It is the number to check armstrong
temp=n;
while(n>0)
{
a=n%10;
n=n/10;
c=c+(a*a*a);
}
if(temp==c)
System.out.println("armstrong number");
else
System.out.println("Not armstrong number");
}

Compare String with/without using equals() method.

mport java.util.Scanner;

public class CompareString{
    public static void main(String[] args){
        Scanner in = new Scanner(System.in);
        System.out.println("Enter the 1st String: ");
        String s1 = in.next();
        System.out.println("Enter the 2nd String: ");
        String s2 = in.next();

        //1st approach without using equals() method
        System.out.println("*********compare 1st String ************");
        if(s1.length()==s2.length()){
            for(int i=0; i<s1.length(); i++){
                if(s1.charAt(i)!=s2.charAt(i)){
                    System.out.println("String "+s1+" is not equal to string "+s2);
                    break;
                }
            }
            System.out.println("String "+s1+" is equal to string "+s2);
        }else{
            System.out.println("String "+s1+" is not equal to string "+s2);
        }

        //2nd approach , just use equals() method
        System.out.println("*********compare 2nd String************");
        if(s1.equals(s2)){
            System.out.println("String "+s1+" is equal to string "+s2);
        }else{
            System.out.println("String "+s1+" is not equal to string "+s2);
        }
    }
}

OutPut

-------------

Enter the 1st String:
Selenium Webdriver
Enter the 2nd String:
Selenium Webdriver
*********compare 1st String************
String Selenium Webdriver is equal to string Selenium Webdriver
*********compare 2nd String************
String Selenium Webdriver is equal to string Selenium Webdriver

Flyod Trinagle

Note- Floyd Triangle is like
1
2 3
4 5 6
7 8 9 10
------------
Code-

import java.util.Scanner;

public class FloydTriangle{
    public static void main(String[] args){
        Scanner in = new Scanner(System.in);
        System.out.println("Enter the number of rows which you want in your Floyd Triangle: ");
        int r = in.nextInt();
        int n=0;
        for(int i=0; i<r; i++){
            for(int j=0; j<=i; j++){
                System.out.print(++n+" ");
            }
            System.out.println();
        }
    }
}

Output

Enter the number of rows which you want in your Floyd Triangle:
5
1
2 3
4 5 6
7 8 9 10
11 12 13 14 15

Thursday, 11 August 2016

Selenium Faqs

1.What are the annotations used in TestNG ?

Ans:@Test, @BeforeSuite, @AfterSuite, @BeforeTest,
@AfterTest, @BeforeClass, @AfterClass, @BeforeMethod,
@AfterMethod.

2.How do you read data from excel ?

Ans:
1.FileInputStreamfis = new FileInputStream(“path of excel file”);

2.Workbook wb = WorkbookFactory.create(fis);

3.Sheet s = wb.getSheet(“sheetName”);

4.String value = s.getRow(rowNum).getCell(cellNum).getStringCellValue();

3.What is the use of xpath ?

Ans:it is used to find the WebElement in web page.
It is very useful to identify the dynamic web elements.

4.What are different types of locators ?

Ans:There are 8 types of locators and all are the static methods of
the By class.By.id(), By.name(), By.tagName(), By.className(),
By.linkText(), By.partialLinkText(), By.xpath, By.cssSelector().

5.What is the difference between Assert and Verify?

Ans: Assert- it is used to verify the result. If the test case fail then
it will stop the execution of the test case there itself and move
the control to other test case.
Verify- it is also used to verify the result. If the test case fail then
it will not stop the execution of that test case.

6.What is the alternate way to click on login button?

Ans:use submit() method but it can be used only when attribute
type=submit.

7.How do you verify if the checkbox/radio is checked or not ?

Ans:We can use isSelected() method.
Syntax –

1.driver.findElement(By.xpath(“xpath of the checkbox/radio button”)).isSelected();
If the return value of this method is true then it is checked else it is not.

8.How do you handle alert pop-up ?

Ans:To handle alert pop-ups, we need to 1st switch control to
alert pop-ups then click on ok or cancle then move control back to
main page.

String mainPage = driver.getWindowHandle();
Alert alt = driver.switchTo().alert(); // to move control to alert popup
alt.accept(); // to click on ok.
alt.dismiss(); // to click on cancel.

//Then move the control back to main web page-

driver.switchTo().window(mainPage); → to switch back to main page.

9. How do you launch IE/chrome browser?

Ans: Before launching IE or Chrome browser we need to set the System property.

//To open IE browser

System.setProperty(“webdriver.ie.driver”,”path of the iedriver.exe file ”);

WebDriver driver = new InternetExplorerDriver();

4 //To open Chrome browser →
System.setProperty(“webdriver.chrome.driver”,”path of the chromeDriver.exe file ”);
5 WebDriver driver = new ChromeDriver();

10.How to perform right click using WebDriver?

Ans:Use Actions class

1. Actions act = new Actions(driver);
2 .// where driver is WebDriver type

3. act.moveToElement(webElement).perform();

4. act.contextClick().perform();

11.How do perform drag and drop using WebDriver?

Ans:Use Action class

1. Actions act = new Actions(driver);

2. WebElement source = driver.findElement(By.xpath(“ —–”));

//source ele whichyou want to drag

3.WebElement target = driver.findElement(By.xpath(“ —–”));
//target where you want to drop

4. act.dragAndDrop(source,target).perform();

12.Give the example for method overload in WebDriver.

Ans:Frame(string), frame(int), frame(WebElement).

13.How do you upload a file?

Ans: To upload a file we can use sendKeys() method.

1 driver.findElement(By.xpath(“input field”)).sendKeys(“path of the file which u want to upload”);

14.How do you click on a menu item in a drop down menu?

Ans:If that menu has been created by using select tag then we can use the methods
selectByValue() or selectByIndex() or selectByVisibleText().
These are the methods of the Select class.
If the menu has not been created by using the select tag then we can
simply find the xpath of that element and click on that to select.

15.How do you simulate browser back and forward ?

Ans:

1driver.navigate().back();

2 driver.navigate().forward();

16.How do you get the current page URL ?

Ans:
1 driver.getCurrentUrl();

17.What is the difference between ‘/’ and ‘//’ ?

Ans://- it is used to search in the entire structure.
/- it is used to identify the immediate child.

18.What is the difference between findElement and findElements?

Ans:Both methods are abstract method of WebDriver interface and used to
find the WebElement in a web page.

findElement() – it used to find the one web element. It return only one WebElement type.

findElements()- it used to find more than one web element. It return List of WebElements.

19.How do you achieve synchronization in WebDriver ?

Ans:We can use implicit wait.
Syntax- driver.manage().timeouts().implicitlyWait(10,TimeUnit.SECONDS);
Here it will wait for 10sec if while execution driver did not find
the element in the page immediately.
This code will attach with each and every line of the script automatically.
It is not required to write every time. Just write it once after opening the browser.

20.Write the code for Reading and Writing to Excel through Selenium ?

Ans:1.FileInputStreamfis = new FileInputStream(“path of excel file”);

2. Workbook wb = WorkbookFactory.create(fis);

3. Sheet s = wb.getSheet(“sheetName”);

4. String value = s.getRow(rowNum).getCell(cellNum).getStringCellValue(); // read data

5. s.getRow(rowNum).getCell(cellNum).setCellValue(“value to be set”); //write data

6.FileOutputStreamfos = new FileOutputStream(“path of file”);

7.wb.write(fos); //save file

21.How to get typed text from a textbox ?

Ans:use getAttribute(“value”) method by passing arg as value.

1 String typedText = driver.findElement(By.xpath(“xpath of box”)).getAttribute(“value”));

22.What are the different exceptions you got when working with WebDriver ?

Ans:ElementNotVisibleException, ElementNotSelectableException, NoAlertPresentException,
NoSuchAttributeException, NoSuchWindowException, TimeoutException, WebDriverException etc.

23.What are the languages supported by WebDriver ?

Ans:Python, Ruby, C# and Java are all supported directly by the development team.
There are also webdriver implementations for PHP and Perl.

24.How do you clear the contents of a textbox in selenium ?

Ans:Use clear() method.

1.driver.findElement(By.xpath(“xpath of box”)).clear();

25.What is a Framework ?
Ans:A framework is set of automation guidelines which help in
Maintaining consistency of Testing, Improves test structuring, Minimum usage of code, Less Maintenance of code, Improve re-usability, Non Technical testers can be involved in code, Training period of using the tool can be reduced, Involves Data wherever appropriate.
There are five types of framework used in software automation testing:
1-Data Driven Automation Framework
2-Method Driven Automation Framework
3-Modular Automation Framework
4-Keyword Driven Automation Framework
5-Hybrid Automation Framework ,its basically combination of different frameworks. (1+2+3).

26.What are the prerequisites to run selenium webdriver?

Ans:JDK, Eclipse, WebDriver(selenium standalone jar file), browser, application to be tested.

27.What are the advantages of selenium webdriver?

Ans:It supports with most of the browsers like Firefox, IE, Chrome, Safari, Opera etc.

a) It supports with most of the language like Java, Python, Ruby, C# etc.
b) Doesn’t require to start server before executing the test script.
c) It has actual core API which has binding in a range of languages.
d) It supports of moving mouse cursors.
e) It support to test iphone/Android applications.
28.What is WebDriverBackedSelenium ?

Ans:WebDriverBackedSelenium is a kind of class name where we can create an object for it as below:

Selenium wbdriver= new WebDriverBackedSelenium(WebDriver object name, “URL path of website”)
The main use of this is when we want to write code using both WebDriver and Selenium RC , we must use above created object to use selenium commands.

29.How to invoke an application in webdriver ?

Ans:
driver.get(“url”); or driver.navigate().to(“url”);

Friday, 5 August 2016

Manual Testing FAQ

1.What are different Software Development models?

Ans:Waterfall Model, Incremental Model, Prototype Model, Spiral Model, Agile Methodology and V-Model.

2.What are the steps in SDLC?

Ans:Feasibility analysis, Requirements gathering, Design, Implementation, Testing and Release & Maintenance.

3. Describe V-Model?

Ans:It is otherwise called as Verification Validation model, testing start at very initial stage of software development process. There are 2 categories of testing performed as part of V-Model, static and dynamic testing, for every level of testing there will be plan defined.

4.What is Agile Testing model?

Ans:Agile testing involves testing from the customer perspective as early as possible, testing
early and often as code becomes available and stable enough from module/unit level testing.
5. What is a prototype?

Ans:In software development, a prototype is a rudimentary working model of a product or information system, usually built for demonstration purposes or as part of the development process.

6.What is White box testing and black box testing?

Ans:White box testing is based on knowledge of the internal logic of an application’s code.Tests are based on coverage of code statements, branches, paths and conditions.

Black box testing is functional testing, not based on any knowledge of internal software design or code. Black box testing is based on requirements and functionality.

7.What is sanity testing?

Ans:A quick and initial test to make sure the system can operate and process at least a minimal workload. It is a good idea to use a smoke test as entry criteria into feature testing, in order to ensure that the system is testable, and to avoid wasting time trying to test a system, which fails frequently.

8. Can you name few types of testing?

Ans:As part of Black box testing, following testing types can be performed: Sanity testing, Functional Testing, Re Testing, Regression Testing, System Testing, Back-End Testing, Acceptance Testing, Ad-hoc testing.

9.What is Test Plan?

Ans:A test plan is a systematic approach to testing a system such as software. The planTypically contains a detailed understanding of what the eventual workflow will be.The test plan defines the objectives and scope of the testing effort, and identifies themethodology that your team will use to conduct tests. It also identifies the hardware,software, and tools required for testing and the features and functions that will be tested. A well-rounded test plan notes any risk factors that jeopardize testing and includes a testing schedule.

10.What is Testing Life Cycle?

Ans:A collection various activities performed in executing a software application, it consists of the following stages.

Requirements stage
Test Plan
Test Design.
Design Reviews
Test Cases preparation.
Test Execution
Test Reports.
Bugs Reporting
Reworking on patches.
Release to production.

11. What is Test Strategy?

Ans:The Test Strategy is the plan for how you are going to approach testing. It is like a project charter that tells the world how you are going to approach the project.
12.What is difference between QA and QC?

Ans: Quality Assurance: A set of activities designed to ensure that the development and/or maintenance process is adequate to ensure a system will meet its objectives.
Quality Control: A set of activities designed to evaluate a developed work product.

13.To whom you report defects?

Ans:A defect is generally reported to the test lead and lead will intern assign it to the development team, but at times the defect is assigned directly to the developer by the test engineer.

14. What is showstopper?

Ans:A hardware or especially software bug that makes an implementation effectively unusable one that absolutely has to be fixed as early as possible.

15.What are the severity levels you give for a defect?

Ans:We follow four levels of severity for a defect, Critical, High, Medium and low (cosmetic)

16.How are you tracking defects in your project?

Ans:Using defect tracking tool (Quality Center)

17.What is defect life cycle?

Ans:Various stages of a defect from the time it’s identified till the same is closed is know as defect life cycle.

18. What are the defect statuses?

Ans:Statuses of a defect can be: New, Open, Fixed, Deferred, Not a bug, duplicate, reopen and closed.

19.What are error, defect and failure?

Ans: Error: A human action that produces an incorrect result

Defect: A flaw in a component or system that can cause the component or system to fail to perform its required function

Failure: Deviation of the component or system from its expected delivery, service or result.
20. What is difference between unit testing and Integration Testing?

Ans: Unit Testing: It is a method of testing that verifies the individual units of source code are working fine.

Integration Testing: Objective of Integration testing is to make sure that the interaction of two or more components produces results that satisfy functional requirement. In integration testing, test cases are developed with the express purpose of exercising the interface between the components.

21.What is regression testing and Retesting?

Ans: Regression Testing: Regression testing is done to ensure that enhancement, defect fixes Or any other changes made to the software has not broken any existing functionality.

Retesting: When a developer resolves/fixes a defect on a modified build, then it would be sent to testing team for retesting that defect, to evaluate the bug fix work. Perform the retesting, If the defect is successfully resolved then the corresponding defect Can be formally closed otherwise it should be properly fixed in the next build.

22.What is BVA?

Ans:The purpose of boundary value analysis is to concentrate the testing effort on error prone areas by accurately pinpointing the boundaries of conditions

23. What is Traceability matrix?

Ans:A traceability matrix is created by associating requirements with the work products that satisfy them. Tests are associated with the requirements on which they are based and the product tested to meet the requirement.

24.How do you prepare traceability matrix?

Ans:Requirements traceability with the tests can be prepared in to a simple EXCEL documents or we can also perform this activity more effectively Quality Center (Test Management Tool)

25. What are the contents of Test Plan?

Ans:Contents of Test Plan:

26.What is a Build?

Ans:After completion of development dev. team release to testing team. After sanity testing if any changes required dev.team modifies the build & releases with different build name.

27.What is configuration management?

Ans:Configuration management (CM) is a processes used to control, coordinate and track code, requirements, documentation, problems, change requests, designs, tools, compilers,
libraries, patches, changes made to them and who makes the changes.

28.Suppose if the developer rejects defect what you will do as a Test Engineer?

Ans:Firstly I will set up a review meeting with the developer and make him understand, by reproducing the defect and referring to the requirements documents.

29. How many test cases you write in one day?

Ans:On an average of 25 test cases a day

30.How many defects you find in one day?

Ans:It depends on the application and the number of test cases executed in a day.

31.What is ECP?

Ans:Equivalence partitioning is a black-box testing method.Divide the input domain of a program into classes of data Derive test cases based on these partitions.An quivalence class represents a set of valid or invalid states for input condition.An input condition is:A specific numeric value, a range of values A set of related values, or a Boolean condition.

32.What is a Test Case?

Ans:Normally a system is expected to perform a certain function. The Test cases verifies thatThe system does in fact perform this function as expected – that is, as described by the use case/Requirement.

33.What are the fields in Test Case?

Ans: The test case will have TestCase,ID,Description,Preconditions
Priority,Steps / Action,Expected Result,Actual Result,Status,Module name,Test Engineer name,Project name,Date

34. As a Test Engineer what are your responsibilities?

Ans:Requirement Analysis and Test case Identification Preparing test cases,Executing testcases,Preparing defects,reports Participating in review meetings.

35.How do you prepare Test Data?

Ans:We prepare test data generally in excel sheet based LLD,FRS/SRS.

36.What are the fields in Defect report?

Ans:The defect report will have

Defect ID
Summary
Priority
Severity
Assigned To
Detected By
Status
Resolution Type
Fixed By
Build Ver
Expected
Actual
Repro Steps
Release Ver
Comments

37. What is Clear box testing?

Ans:White box testing is also called as clear box testing as dev. team verifies internal logic.

38. As a Test Lead what are your responsibilities?

Ans:Prepare test plan
Conducting review meetings
Scheduling
Review test documents
Preparing status reports
Monitoring the process

39.What is kickoff meeting?

Ans:An initial Project start up meeting from which the formal test activities are initiated.

40.What are the drawbacks in manual testing compared to Automation?

Ans: Following are the drawbacks of manual testing,
Time consuming
Low reliability
Human resources
Inconsistent
41. What are the Test Deliverables?

Ans:The following items will be delivered
Test Plan
Test Cases (Maintained in QC)
Daily Test Execution Report
Test Exit Report
Defect Log (Maintained in QC)
Traceability Matrix
Project Metrics.
42.Suppose if you don’t have test cases how do you conduct Testing?

Ans:We have to adopt for the informal test execution processes to uncover defects in the System by performing testing like Ad-Hoc, Where this testing does not require the formal test cases but it is based on the previous experience on the system under test.

43.What are the difficulties if you do testing without test cases?

Ans:Test Cases would provide formal way of performing testing, which contribute for the expected requirements coverage with out test case design, Expectations may not be clear Possibility of missing some of the test scenarios Test Data not documented and hence no proper impact on the functionalities. Test execution can be initiated by testers without 100% system knowledge. It cannot guaranty the expected test coverage.

44.What is functional testing and nonfunctional testing?

Ans:Functional testing would address testing the functional features of the software system like Customer Creation, Fund Transfer etc, Where as nonfunctional testing concentrates on testing functional features of the software system like the Performance Parameters associated with the system, Security Testing, Compatibility Testing.

45.What is Test Bed?

Ans:Test Bed is an execution environment configured for software testing. It consists of specific hardware, network topology, Operating System, configuration of the product to be under test, system software and other applications.

46.What is Test Setup environment?

Ans:A Test Environment set up would have the selection of the following components as closely as possible to the live environment in which the build would be deployed and tested.Operating System, Browsers, Web Server and App Server, Database (Oracle/DB2) Test environment is the working environment where tests will be executed. The Testing Team may have their own Test Environment. Once the testing team certifies the system in Test Environment, it is migrated to the Production Environment.
47.What are the different types of testing can be conducted for web application?

Ans:The Web Application testing should have the following coverage’s.Web Functionality Testing, Database functionality Testing,Usability Testing, Performance Testing,Browser Compatibility Testing,Security Testing,Localization Testing.

48.What is smoke testing?

Ans: A quick and initial test to make sure the system can operate and process at least a minimal workload. It is a good idea to use a smoke test as entry criteria into feature testing, in order to ensure that the system is testable, and to avoid wasting time trying to test a system,which fails frequently.What is adhoc testing?

Ans: A random and informal test performed based on the experience, this would be conducted At later stages in the test execution life cycle since the test case execution may not provide 100% test coverage. We would use this test to improve test coverage by identifying the defects, which are uncovered by the test cases.

50.What are test scenarios?

Ans:Test Scenarios are the end-to-end test cases prepared to test a realistic business flow with A specific pre-condition, Test Data Values and expected behavior.

51.How do you prepare test scenarios?

Ans:The Test Scenarios are derived from Requirements documents/Use Case Documents Based on the following factorsIdentify the multiple flows associated with a given event or a business scenario Identify the multiple conditions associated with a given event.Identify the multiple data values required.

52.What is difference between severity and priority of a defect?

Ans:Defect Severity represents how badly the functionality was failed and what serious impact It will have on the remaining system functionalities and also on the customer business, Where as Defect Priority represents the importance of the defect and its resolution by the developers. The Severity and Priority levels are provided by the testers, The Severity levels should not be changed, but the priority levels can be changed by the Test Lead/Developers from on build to another based on the defects to be resolved.

53.What is priority for a Test Case?

Ans:Priority of a test case should represent what risk and important functionality /Requirement it would cover for testing.

54.What is the status for a Test Case?

Ans:No Run
Not Completed
Passed
Failed

55.Can you write test cases for a pen?

Ans:Dimension of the pen,
Color of the pen,
logo of the pen maker,
Total length that pen can write,
Strength of the nib,
grip of the pen.
Against the surface it can write.
Hanger provided in the cap,
body of the pen should perfectly fit with the cap of the pen,

56.What is defect Age?

TAns:he time difference between defect reported and the defect resolved on.

57.What is latency time?

Ans:Latency time is a wasted time where a specific event would be waiting for another event to happen, for example a defect reported by the testing team would not get resolved for several modified builds would be called as a latent defect.

58.What is response time?

Ans:It is one of the important performance parameter, which would evaluate the Time interval between the instance at which a user at a GUI of the software system enters a request for a response from a computer and the instance at which the first character of the response is received at the GUI.
59.What are entry criteria for Test Execution?

Ans:Test Execution process can be formally initiated based on the following conditions.
The Test case design is completed with expected coverage for the given requirements.Test Data set up completed and incorporated in all the test cases.Test Environment set up completed Build Have enough stability to take testing(Testable).

60. What is Alpha & Beta Testing?

Ans: Alpha Testing:
The Alpha test is conducted at the developer’s site by a customer.The Software is used in a natural setting along with the developer.The developer records the error and usage problems.Alpha Tests are done in a controlled environment.
Beta Testing:
The Beta Test is conducted at one or more customer site by the end users of the software.The developer is not present during these tests.The customer records the error and reports these to the developers.
This is followed by the release of the product.

61.How do you review the test cases?

Ans:The Reviews are the Static Techniques, which are driven by the Checklist. The Checklist should be provided with the list of questionnaires indicating the information to be incorporated, Standards to be followed for a Test Case.

62.What is closed box testing and open box testing?

Ans:Closed box testing is blackbox testing where as openbox tesing is whitebox testing.

63.What are stubs and drivers?

Ans:Stub:- A skeletal or special-purpose implementation of a software component, used to develop or test a component that calls or is otherwise dependent on it. It replaces a called component
Driver :-A software component or test tool that replaces a component that takes care of the control and/or the calling of a component or system.

64.What is verification and validation?

Ans:Validation: The process of evaluating software to determine compliance with specifiedrequirements.
Verification: The process of evaluating the products of a given software development activity to determine correctness and consistency with respect to the products and standards provided as input to that activity.

65.How do you conduct end to end testing?

Ans:Our test management team provides us end to end test scenarios. Based on that I will continue end to end testing on the application.

66. What is a release note?

Ans:A release note is given to client along with the build when it is ready for the deployment.Release notes consists of the deployment details and also the known limitations of the build, if there are any critical errors that are still Not resolved and build is to be released, then those are also mentioned in the release notes.

67. What is signoff?

Ans:Taking an final approval of an document and process is called signoff

68.What type of testing you perform in organization while you do System testing, give clearly?

Ans:Functional testing
User interface testing
Usability testing
Compatibility testing
User help testing
Security testing
Capacity testing
Performance testing
Sanity testing
Regression testing
Reliability testing
Recovery testing

69.What are the Test Challenges you faced in your project?

Ans:While doing execution, unexpectedly some of the applications are down or environment unavailability.Data issues i.e proper data has not been provided for executing the test case.
Some of the application links are not working which are Provided in environment sheet

70.Write test cases for sending mails through microsoft-outlook xpress?

Ans:Check the successful login of the Microsoft oulook xpress after entering the user ID,password.Check whether the Microsoft oulook xpress is opening.Check whether the new mail/reply/reply to all/forward button is enable.Check that we are able to type the subject, body in the mail.Check that we r able to add the email_ID (email_address).Check whether the signature is automated in the new mail/reply/reply to all/forward mails.(if required) Spell check (if required) check whether the send button is enabl

1)What is Test case and Templete

A test case is a documentation which specifies input values, expected output and the preconditions for executing the test.

Test case is How To Be Tested

A set of test inputs, execution conditions, and expected results developed for a particular objective, such as to exercise a particular program path or to verify compliance with a specific requirement.

Test Case Template

A test case can have the following elements. Note, however, that normally a test management tool is used by companies and the format is determined by the tool used

Test Case Field Description

Test Suite ID – The ID of the test suite to which this test case belongs.
Test Case ID – The ID of the test case.
Test Case Summary – The summary / objective of the test case.
Related Requirement – The ID of the requirement this test case relates/traces to.
Prerequisites – Any prerequisites or preconditions that must be fulfilled prior to executing the test.
Test Procedure – Step-by-step procedure to execute the test.
Test Data – The test data, or links to the test data, that are to be used while conducting the test.
Expected Result – The expected result of the test.
Actual Result – The actual result of the test; to be filled after executing the test.
Status – Pass or Fail. Other statuses can be ‘Not Executed’ if testing is not performed and ‘Blocked’ if testing is blocked.
Remarks – Any comments on the test case or test execution.
Created By – The name of the author of the test case.
Date of Creation – The date of creation of the test case.
Executed By – The name of the person who executed the test.
Date of Execution – The date of execution of the test.
Test Environment – The environment (Hardware/Software/Network) in which the test was executed.

Defect Life Cycle
-----------------

Defect life cycle is a cycle which a defect goes through during its lifetime. It starts when defect is found and ends when a defect is closed, after ensuring it’s not reproduced. Defect Life Cycle is related to the bug found during testing.

The bug has different states in the Life Cycle. The Life cycle of the bug can be shown diagrammatically as follows:

defect life cycle
----------------------
1.New:When a defect is logged and posted for the first time. It’s state is given as new.
2.Assigned:After the tester has posted the bug, the lead of the tester approves that the bug is genuine and he assigns the bug to corresponding developer and the developer team. It’s state given as assigned.
3.Open: At this state the developer has started analyzing and working on the defect fix.
4.Fixed: When developer makes necessary code changes and verifies the changes then he/she can make bug status as ‘Fixed’ and the bug is passed to testing team.
5.Pending retest: After fixing the defect the developer has given that particular code for retesting to the tester. Here the testing is pending on the testers end. Hence its status is pending retest.
6Retest: At this stage the tester do the retesting of the changed code which developer has given to him to check whether the defect got fixed or not.
7.Verified: The tester tests the bug again after it got fixed by the developer. If the bug is not present in the software, he approves that the bug is fixed and changes the status to “verified”.
8.Reopen: If the bug still exists even after the bug is fixed by the developer, the tester changes the status to “reopened”. The bug goes through the life cycle once again.
9.closed: Once the bug is fixed, it is tested by the tester. If the tester feels that the bug no longer exists in the software, he changes the status of the bug to “closed”. This state means that the bug is fixed, tested and approved.
10.Duplicate:If the bug is repeated twice or the two bugs mention the same concept of the bug, then one bug status is changed to “duplicate“.
11.Rejected:If the developer feels that the bug is not genuine, he rejects the bug. Then the state of the bug is changed to “rejected”.
12.Deferred:The bug, changed to deferred state means the bug is expected to be fixed in next releases. The reasons for changing the bug to this state have many factors. Some of them are priority of the bug may be low, lack of time for the release or the bug may not have major effect on the software.
13.Not a bug: The state given as “Not a bug” if there is no change in the functionality of the application. For an example: If customer asks for some change in the look and field of the application like change of color of some text then it is not a bug but just some change in the looks of the application.

2) Security testing
-----------------------

It is a type of non-functional testing.

Security testing is basically a type of software testing that’s done to check whether the application or the product is secured or not. It checks to see if the application is vulnerable to attacks, if anyone hack the system or login to the application without any authorization.

It is a process to determine that an information system protects data and maintains functionality as intended.

The security testing is performed to check whether there is any information leakage in the sense by encrypting the application or using wide range of software’s and hardware’s and firewall etc.

Software security is about making software behave in the presence of a malicious attack.

The six basic security concepts that need to be covered by security testing are: confidentiality, integrity, authentication, availability, authorization and non-repudiation.

Confidentiality
Integrity
Authentication
Authorization
Availability
Non-repudiation

3) What is black-box testing and what are black-box testing techniques?

Without having any knowledge on the source-code(developers coding), testers will test the application based on requirements,
this is called as black-box testing technique

Techniques:
1) Boundary value analysis
2) Equivalence Class Partition
3) Decision table
4) Error guessing
5) What is BVA (boundary value analysis)? Where you have used ?

It is a back-box testing technique used for testcase design ,here we will check for the above below edges of the fields (ex: username field)
for ex: if you consider this requirement username should take 7-9 characters then BVA for this is
max+1= 10 should not accept
min=7 shoud accept
min-1=6 should not accept
max=9 should accept
max-1=8 should accept
min+1=8 should accept
like this we can find out conditions
4) What is ECP( Equivalence class partition) ?

Equivalence class partition is a black-box testing technique which will divide the data into valid part and invalid parts means what kind of data should application accept and what kind of data application should not accept for ex: consider this requirement username should take alphabets only For above requirement we can write ecp like this valid : alphabets invalid: special characters, alphanumerics

5) What is decision table testing ?
It is a black-box testing technique used for documents complicated scenarios. advantage of decision table is we can cover every condition
It is black-box testing technique, test engineers will use Decision Table to document the complicated scenarios, the advantage of decision table is it will cover each and every possible conditions and combinations.

Decision table contains two values
1. Conditions
2. Actions

lets discuss decision table with an example.

In this example i am taking an email login page example for decision table
For login to any email application first we need to enter email and password.

Building decision table for Email and Password
Email :: F T F T

Passwd : : F F T T

Expected Error Error Error Loging
result please please please Sucessfully
enter enter enter
email Passwd email

In the above table “F” indicates the invalid data and “T” indicates the valid data. For the above scenario we have 4 possible conditions .

4 Test cases for above example: (here iam writing only testcase title)

1.Verify that user should not able to login to the email application with invalid email and invalid password.
2.Verify that user should not able to login to the email application with valid email and invalid password.
3. Verify that user should not able to login to the email application with invalid email and valid password.
4. Verify that user should able to login to the email application with valid email and valid password.

8) What is defect age in software testing?

It is a time interval between defect found and defect closure

Few very important scenarios related to the severity and priority which are asked during the interview:

High Priority & High Severity: An error which occurs on the basic functionality of the application and will not allow the user to use the system. (Eg. A site maintaining the student details, on saving record if it, doesn’t allow to save the record then this is high priority and high severity bug.)

High Priority & Low Severity: The spelling mistakes that happens on the cover page or heading or title of an application.
----------------------------

High Severity & Low Priority: An error which occurs on the functionality of the application (for which there is no
----------------------------- workaround) and will not allow the user to use the system but on click of link which is rarely used by the end user.

Low Priority and Low Severity:
-----------------------------
Any cosmetic or spelling issues which is within a paragraph or in the report (Not on cover page, heading, title).

How much the bug is affecting the functionality of the application?

Ex.

1. High Priority and Low Severity:
If a company logo is not properly displayed on their website.

2. High Priority and High Severity:
Suppose you are doing online shopping and filled payment information, but after submitting the form, you get a message like "Order has been cancelled."

3. Low Priority and High Severity:
If we have a typical scenario in which the application get crashed, but that scenario exists rarely.

4. Low Priority and Low Severity:
There is a mistake like "You have registered success" instead of successfully, success is written.

The differences between HTTP and HTTPS are following:
-----------------------------------------------------

- Hypertext Transfer Protocol is a protocol for information to be passed back and forth between web servers and clients. Https is refers to the combination of a normal HTTP interaction over an encrypted Secure Sockets Layer (SSL) or Transport Layer Security (TLS) transport mechanism.

- HTTP use port number 80 whereas HTTPS use port number 443.

- HTTP can support the client asking for a particular file to be sent only if it has been updated after a certain date and time whereas Hypertext Transfer Protocol over Secure Socket Layer is built into its browser that encrypts and decrypts user page requests as well as the pages that are returned by the Web server.

The Quality Center modules are:

Management Module: This module includes following sub modules:

1. Release module: Enable us to define release and cycles for the application management process.
2. Libraries module: Enables us to define libraries to track changes in project, reuse entities in project, or share entities across multiple projects.

Requirement Module: Helps us to manage requirements. This includes defining what we are testing, defining requirement topics and items, also analyzing requirements.

Test Plan: Enable us to develop and manage test in a hierarchical tree-structure. Tests can be linked to requirement and defects.

Test Resources: Enables us to manage test resources in a hierarchical tree structure. Tests resources can be associated with tests.

Test lab: Enables us to run tests and analyze the results.

Defect Module: Helps us to report defects, determine, repair priorities and reopen defects.

Dashboard: Helps to create graphs, reports and excel reports.
How many built in tables does Quality Center have?

There are six tables accessible to user via QC’s customized project interface:

- Test Table
- Test Step Table
- Test Set Table
- Run Table
- Defect Table
- Requirement Table

Selenium Programs